Why Seam Failure in Membrane Roofing Happens

You’ll want your membrane roofing to provide the superior and long-lasting performance you’ve come to expect. That’s why you should try to keep tabs on its condition. Make it a habit to conduct a periodic visual inspection of your membrane roof, paying close attention to its seams especially. After all, the seams are considered its weakest point; the component that’s most likely to fail.

Here are some of the reasons for seam failure in membrane roofs.

• Weathering: Leaks are a common problem in membrane roofing, and they usually start at the seams. Constant exposure to hail, wind, sun and rain can lead to shrinkage and brittleness in the roof membrane. This, in turn, compromises the adhesives used to keep the seams intact, causing them to fail.

• Improperly installed insulation: The insulation used in your membrane roofing should be applied correctly. Otherwise, the material will warp and create bumps under the roof membrane. This soon becomes a huge issue because the bumps will start pulling at the seams, creating tears in several areas. You might want to call a trusted local roofer like Ben’s Construction Inc to promptly deal with this issue.

• Poor workmanship: Regardless of the type of material used in your membrane roof, it will still be prone to water infiltration if the seams aren’t sealed properly. And just because the membrane seams appear to overlap doesn’t mean the seals aren’t defective. Openings may still form along the seams, leaving the roof system more susceptible to weather damage.

Preventing Seam Failure in Membrane Roofs

Seam failure is less likely to occur if your membrane roof was installed properly in the first place. That’s why you should be careful with your choice of contractors. To ensure exceptional results, work with a licensed, insured and experienced roofing specialist like Ben’s Construction Inc. We’ll help you get the most of the life and performance of your commercial roof with our top-tier products and services.

Schedule a Roof Consultation

You need not look any further than Ben’s Construction Inc for high-quality commercial and residential roofing services. Once you’ve noticed seam failure in your membrane roofing, turn to us immediately for safe and effective solutions. We proudly serve Natick, MA, and the surrounding areas. Call us now at (508) 962-2417, or fill out this contact form to request a roofing quote.